Johnson Automation & Control -»   Pumping Automation

Pumping Automation

DOMESTIC APPLICATION MODELS

Water Level Indicator & Alarm System
Water Level Indicator is used for only indicating the approx. level of water available in the tank. It indicates 4 Levels of water in the tank (Full, 3/4, Half & Reserve) with bright LED's of 4 different colours. It also blows alarm both at Full & Reserve Level.






Single Tank Controller
HYDROtECH automatically controls the pump used for filling only one tank. It automatically starts & stops the motor sensing the level of water in the tank (Overhead / Underground).
As the water reaches middle level, it will start motor automatically & stops on reaching top level of the tank. Even if the water stops coming in the tank motor will stop automatically.




Dual Tank Controller
HYDROtECH automatically controls the pump for filling Overhead tank with reference to the water availability in Underground tank.

As the water goes below the middle level in the overhead tank it will start the motor & during filling of the overhead tank if the water level goes below the bottom level of underground tank, HYDROtECH will switch off the motor. This will protect your motor from “DRY RUNNING”. Now again, if the water reaches middle level of underground tank motor will start automatically.



HYDROtECH Online Controller
If there is very low water pressure in your area or air locking problem, we can provide air lock breaking device to help the system work more smoothly.
As the water reaches in the pipeline, the air lock breaking device releases the air & water touches the sensor mounted on the pipeline itself & hence automatically starts the motor.